Generally speaking, the use frequency of winding film machine is very high, so after long-term use of equipment, some places need to be maintained and lubricated, especially the main parts of winding packaging machine and its connection points, need to carry out extra effective maintenance and lubrication work.

Then for the winding machine, which parts need lubrication, in order to ensure that the winding machine equipment can be used normally for a long time.

1. Timely oil injection holes for gear meshing and bearing with seat, and oil lubrication for moving parts. Once in each shift, it must be done day after day to persevere in order to be effective, to be responsible for equipment maintenance, and to provide technical support for the future work to be carried out smoothly.

2. When filling lubricating oil for this kind of winding film machine, please pay attention not to drop oil on the transmission belt, in order to prevent slippage and loss or premature aging damage of the belt.

3. The reducer of the winding film machine is an important part of the equipment. It is strictly forbidden to run without oil. After 300 hours of first operation, the inside of the reducer is cleaned and replaced with new oil. After that, the oil is changed every 2500 hours of work. This phenomenon is unchanged and must be carried out conscientiously.

4. In fact, when we use lubricating oil for machine lubrication, we should also ensure the quality of lubricating oil. The best lubricating oil we buy is the national standard. It should be suitable for high-speed rotating parts, so that we can ensure our lubricating effect.

5. In fact, the premise of lubrication is clean. Only when we are clean, can we ensure that we lubricate better. Therefore, before lubricating the various parts of the machine, we must clean our machine, so as to ensure that.